Pre-installation: Before applying RV RoofMagic do a thorough inspection of the entire RV roof. Search for any separations around seams and AC and fan vents. Water wash the entire roof with bristle brush to remove any dirt or debris. Mix two cups of Clorox with every gallon of water to kill any bacteria residing on the surface of roof. Also use a mild degreaser to remove oil residue. Now let the roof to dry out.
Application: RV RoofMagic is a ready to use product, no thinning is required. Mix it approximately for five minutes with an electric drill. Apply RvRoofMagic with nap rollers and paint brushes as needed. Average dry to touch time is three to four hours and will completely dry in four to ten hours. Wait for 24 hours before going on a journey.
Tips: Always plan to apply the product when rain is not forecasted. RV RoofMagic is for outdoor use but can be used indoors by using respirator commonly available at stores. When the product dries out any brush or roller marks will vanish away and one will have a seamless coating waiting for you. Clean the coating with xylene as and when needed.
It’s always good to get advice from expert https://www.rvroofmagic.com/contact.php or visit to read detailed application process and instruction manual https://www.rvroofmagic.com/application-process.php.
Comments